Once your hardware is installed, you may need to grab a new pilographics card te for Windows (if you've changed brands or left an iGPU) to benefit from hardware acceleration.If you do not have the latest drivers of the graphics card in your PC or laptop, your games may not run smoothly. For the graphics card, we chose to connect to the screen via a DisplayPort cable to benefit from Adaptive Sync (FreeSync / G-Sync). In our example, we were using integrated graphics via HDMI from the back I/O plate of the motherboard. Please pay particular attention to plugging your monitor into a graphics card port rather than one of your motherboard's monitor outputs. Before you close your case, quickly check that your cabling is tidy and that the graphics card fans aren't impeded by any cabling, so they spin freely.Ĥ Connect your monitor to one of the new display outputs of your graphics cardĪfter closing your case, you might want to plug everything back in and experience your PC's new graphics firepower. Some graphics cards may not need power connectors, drawing all the required power from the PCI slot, but at the other end of the spectrum some very powerful graphics cards require up to three power connectors. Now insert and tighten the bracket screws, securing the card in place.Ĭonnect any required power cables from your power supply to your graphics card. You should feel the graphics card slide into the slot and reach its stable installation position. You will seat the graphics card and press down on its spine with even, positive pressure. Now position the gold contacts of the graphics card over the slot with the socket connectors above the vacant socket(s) as well. If your PCIe slot is vacant, you will now unbox and unbox your graphics card, removing any plastic covers – ours had a bumper on the gold contacts that fit into your motherboard slot. Most modern graphics cards attach to two expansion slots.Ģ Unpack, align and insert the graphics card Then remove the side panel and remove the PCI bracket covers on the back of your case to match the graphics card you purchased. You can leave it on your desk or unplug all the cables and bring it to a clean work surface with good lighting and good access, like we did.

How to install graphic card in pc